Altera USB-Blaster - Page 25

Chapter 2: USB-Blaster Specifications 2–9
References
© April 2009 Altera Corporation USB-Blaster Download Cable User Guide
■ Refer to the following glossary definitions in the Quartus II Help:
■ “USB-Blaster Cable” (general description)
■ “Configuration scheme” (general description)
■ “Programming files” (general description)
■ Refer to the following procedures in the Quartus II Help:
■ Programming a Single Device or Multiple Devices in JTAG or Passive Serial
Mode
■ Programming a Single Device in Active Serial Programming Mode
■ Refer to the following introduction and overview topics in the Quartus II Help:
■ Programmer Introduction
■ Overview: Working with Chain Description Files
■ Overview: Converting Programming Files