14 | OPERATION
PLayiNg coNteNt FroM a Usb/sd card
1) Insert a USB memory stick or SD card into the corresponding port on the unit.
2) The USB/SD memory is detected and the USB playback mode starts automatically. If it does not go to USB playback
mode automatically, press the USB/SD button and select DVD/SD/USB using the navigation buttons and press ENTER
to switch to USB/SD mode.
3) Select the le you wish to play using the navigation buttons on the remote control and press ENTER to conrm.
4) When viewing a JPEG image, the navigation buttons can be used to rotate the image.
To go to the media selection menu, press stop twice.
Note: This USB port is for PLAYBACK ONLY. Attempts to charge smart devices
(e.g. phones, tablets) via this port could damage them.