OPERATION | 13
oPeratioN
Power ON/OFF
• Press the POWER button on the remote control or the unit to turn it on.
• Press the POWER button on the remote (or press and hold the power button on the unit) again to turn the unit o.
Loading a disc
1. Press the DVD/AV button or the USB/SD button to select the DVD mode.
2. Press and hold the OPEN button on the unit and lift up the screen frame.
3. Place a disc on the tray securely with the printed side outward.
4. Close the screen frame and playback will start automatically.
haNdLiNg discs
• In order to keep discs clean, hold the
edge or the hole of a disc. Do not
touch the surface.
• Do not place plaster, tape or any
material on the surface of a disc.
• Keep discs away from direct sunlight
or heat source.
• If a disc is dirty, clean it with a soft
cloth before using it.
• Do not use chemical detergent to
clean discs.
Playing a disc
• When a disc is inserted, the playback starts automatically.
• Use the button, the button, and the and buttons to
control the playback.
• Use the VOL+/VOL- buttons to control the audio volume.
NOTE: If the FM or IR function is turned on in the audio settings
menu, the volume control will be disabled; turn o the FM and IR
function.
• Use the number pad to move to the numbered chapter or track.
• When playing a VCD 2.0 version, press the PBC button to use PBC
function of the VCD.
To Next Page
Loading...