Alto-Shaam AR-7

6. #852 AR-7E ROTISSERIE INSTALLATION/OPERATION/SERVICE MANUAL
SECTION 2 ROTISSERIE OPERATION SECTION 2
Press the ON/OFF key.
The ON/OFF indicator light will illuminate.
The display will show the last set holding temperature.
The hold indicator will illuminate.
The rotisserie will begin to preheat to the holding temperature shown in the display.
Press the COOK key.
The COOK and the TIME underscore lights will alternately illuminate.
The display will indicate the last set cooking temperature when the COOK underscore light is illuminated.
The display will indicate the last set cooking time when the TIME underscore light is illuminated.
Cook temperature indicator bar will illuminate for:
COOK TEMPERATURE 1
Press the COOK key again if 2-step cooking is required.
Cook temperature indicator bar will illuminate for:
COOK TEMPERATURE 2
Press the TIME key.
The TIME underscore light will illuminate.
The display will indicate the last set cooking time when the TIME underscore light is illuminated.
The display will indicate the last set cooking temperature when the COOK underscore light is illuminated.
Time indicator bar will illuminate for:
TIME 1
Press the TIME key again if 2-step cooking is required.
Time indicator bar will illuminate for:
TIME 2
Press the HOLD key.
The HOLD underscore light will illuminate.
The display will indicate the last set holding temperature.
•Product programming can be considered complete after the holding
temperature has been set
or additional browning time can be added
if desired.
•Automatic holding time will activate when the cooking cycle time
has elapsed and the PRODUCT READY BAR is illuminated.
•The product will continue to cook as it decreases from the cooking temperature to the holding temperature.
For best results, always allow for product temperature override.
…to change the displayed time,
press the up and down arrow
key when …
TIME 1
or
TIME 2
is illuminated.
…to change the displayed
temperature, press the up and
down arrow key when …
COOK TEMPERATURE 1
or
COOK TEMPERATURE 2
is illuminated.
ready
AFTER PRESSING THE COOK KEY:
Change the holding temperature,
by pressing the
up and down arrow key when
the HOLD underscore light
is illuminated.
AFTER PRESSING THE HOLD KEY:
AFTER PRESSING THE TIME KEY: