INSTALLATION
Ve ct or F ® Se ries ▪ O pera to r’s Man ual ▪ MN-468 94 ▪ Rev 1 ▪ 7/2 0
33
Continued from previous page
Position the oven To position the oven, do the following.
Step Action
1. Make sure that:
▪ The location where the oven is being installed is rated to support the
weight of the oven,
▪ The oven is within five feet of the appropriate electrical outlet,
▪ You follow the oven clearance guidelines.
2. Move the oven to the installation location and onto the final resting surface.
The oven is now correctly positioned.
Level the oven
To level the oven, do the following.
3. Check the level of the oven using a spirit (bubble) level. Check front to back
and side to side.
Adjust the legs to achieve levelness if necessary.
The oven is now level.
Continued on next page
VMC-DIM-009502
2.0"
51mm
2.0"
51mm
2.0"
51mm
2.0"
51mm
To Next Page
Loading...
