INSTALLATION
Ve ct or F ® Se ries ▪ O pera to r’s Man ual ▪ MN-468 94 ▪ Rev 1 ▪ 7/2 0
34
Continued from previous page
Connect the wiring To connect the wiring, do the following.
4. Set the main disconnect switch a to the OFF position.
5. Connect the supply cord b to a power source in accordance with local codes
and regulations.
Continued on next page
WARNING: Electric shock hazard.
Set the main disconnect switch to the OFF position to
remove electric power from the appliance.
To Next Page
Loading...
