Alto-Shaam Vector VMC-F3E - Page 35

INSTALLATION
Ve ct or F ® Se ries ▪ O pera to r’s Man ual ▪ MN-468 94 ▪ Rev 1 ▪ 7/2 0
35
Continued from previous page
Press reset buttons 6. Press and release the high limit temperature reset buttons c.
Remove the tag d.
Equipotential-
bonding terminal
Result The oven is now installed.
VMC-F3, VMC-F4
VMC-TS-010311
c
d

NOTE: The equipotential-bonding terminal is located at the bottom
rear of the oven.
VMC-TS-009563