EasyManuals Logo
Home>Alto-Shaam>Oven>Vector VMC-H3

Alto-Shaam Vector VMC-H3 Service Manual

Alto-Shaam Vector VMC-H3
138 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
MAINTENANCE
Ve ct or H Se ries S ervice Ma nual MN -4 654 4 Rev 0 1 11/19
45
Continued from previous page
Weekly cleaning
procedure
To clean the oven weekly, do the following.
Step Action
1. Set the main disconnect switch a to the OFF position.
Make sure the oven is cool—chambers are less than 140°F (60°C).
2. Spray the exterior areas of the oven with stainless steel polish.
3. Wipe the exterior areas of the oven with a non-abrasive nylon scrub pad.
4. Spray the interior areas of the oven with oven cleaner. Let the cleaner work
for 3–5 minutes.
5. Wipe the interior of the oven with a non-abrasive nylon scrub pad.
6. Clean each side of the window pane with an all-purpose cleaner.
7. Set the main disconnect switch a to the ON position when complete.
Continued on next page
NOTICE
Use only non-caustic cleaners.
Do not spray directly into the fan openings on the
rear of the oven.
Do not use cleaners that contain sodium hydroxide
(lye) or phosphorus.
VMC-TS-006236

Table of Contents

Other manuals for Alto-Shaam Vector VMC-H3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Alto-Shaam Vector VMC-H3 and is the answer not in the manual?

Alto-Shaam Vector VMC-H3 Specifications

General IconGeneral
BrandAlto-Shaam
ModelVector VMC-H3
CategoryOven
LanguageEnglish

Related product manuals