Need help?Do you have a question about the Alto DPA 900 and is the answer not in the manual?
General| THD | <0.1% |
|---|---|
| S/N Ratio | >100 dB |
| Input Sensitivity | 0.775V |
| Damping Factor | >200 |
| Frequency Response | 20Hz - 20kHz |
| Cooling | Forced air cooling |
| Protection | Thermal, short circuit |
| Connectors (Input) | XLR, 1/4" TRS |
| Connectors (Output) | Speakon, binding posts |
| Power Output (8 ohms) | 2 x 300W RMS |
| Power Output (4 ohms) | 2 x 450W RMS |
| Input Impedance | 20k ohms balanced, 10k ohms unbalanced |
| Dimensions | 19" x 3.5" x 15" (483 x 88 x 381mm) |
| Weight | 28.6 lbs (13 kg) |
To Next Page
