Altrad Belle DC 300E+ - Introduction; Warning; Serial Numbers

5
Introduction
GB
Thepurposeofthispublicationistoenabletheowner/operatortomaintainandusethetoole󰀩ciently.Iftheseinstructionsare
followedcarefullytheywillcontributetoyearsofe󰀩cientandprotableoperationofthetoolsinthetrueAltradBelletradition.
Thevariationsinoperatingconditionsmakeitimpossibleforthecompanytomakecomprehensiveordenitestatementsinits
publications regarding performance and methods of use of its tools, or to accept any liability for any loss or damage which
may result from these statements, or from any errors or omissions.
When replacements are required, insist on genuine Altrad Belle parts, as extensive damage is liable to result from the use of inferior
quality parts.
Inaccordancewiththecompany’spolicyofcontinuousimprovementtoitstools,alterationtothespecicationsoftoolsmaybemadeat
any time without notice and the company accepts no responsibility for any discrepancies which may occur between
thespecicationsofitstoolsandthedescriptionsthereofcontainedinthispublications.
Thismanualhasbeenwrittentoincludeallfactoryttedoptionsandspecicationsforworld-wideuse,butthisdoesnotimplythatallor
anyoftheseareincludedinthestandardtoolconguration.ThereforelocalAltradBelleDealer’smustalwaysbeconsultedabouttool
specications.
This manual may not in part, or in whole, be copied, photocopied, reproduced, translated, or converted to any electronic or tool read-
able form without written consent of Altrad Belle.
Directives with regard to the notations.
Text in this manual to which special attention must be paid are shown in the following way:
The product can be at risk. The tool or yourself can be damaged or injured if procedures are not
carried out in the correct way.
CAUTION
The life of the operator can be at risk.
WARNING
Before you operate or carry out any maintenance on this tool YOU MUST READ and STUDY
this manual.
WARNING
WARNING
GB
KNOW how to safely use the unit’s controls and what you must do for safe maintenance. (NB Be sure that you know how to switch the
toolo󰀨beforeyouswitchon,incaseyougetintodi󰀩culty.)
ALWAYS wear or use the proper safety items required for your personal protection. If you have ANY QUESTIONS about the safe use
or maintenance of this unit, ASK YOUR SUPERVISOR OR CONTACT: Altrad Belle (UK):+44(0)129884606
Serial Numbers
GB
ENSURE you make a note of the serial numbers of your tool and always quote them in any communication with Altrad Belle or one of
our dealers.
A - MACHINE SERIAL NUMBER
Model: DC 300E+
Code: DC300ES
82V Disc Cutter
Max speed: 6400 min
-1
IPX4
Altrad-Belle.com --- Altrad-Belle247.com
Altrad Belle
Sheen, Nr. Buxton, Derbyshire, SK17 0EU, GB
Tel.: +44(0)1298 84606 --- Email: sales@altrad-belle.com
Serial No.:
Date of Manufacture: