30 Dishwasher / User’s Manual/41 EN
Operation of the product
Interior Lighting
(depends on the model)
Some models have interior lighting to
illuminate the interior when the door is
opened.
Floor illumination
Warning to show that machine is
in washing phase
(depends on the model)
Your machine reflects a light to the floor
during the washing process. This light turns
off after the washing process is complete.
C
Floor illumination is activated
automatically when the
washing programme starts and
remains lit until the end of the
programme.
C
Floor illumination cannot be
cancelled by the user.
Child (Key) Lock
(Depends on the Model)
You may prevent other persons from
affecting and changing the program flow
and delay time during the operation of the
machine.
To activate the child lock:
1. Press and hold the Child (Key) Lock key
for three seconds.
2. Child (Key) Lock indicator is illuminated
and the key lock shall be activated.
Child Lock prevents changing of the
selected functions and deactivates the
Start / Hold / Cancel key.
Child lock does not lock the door of the
machine.
Child lock automatically deactivates if
you turn off your machine with the On-
off key.
To cancel the child lock:
1. Press and hold the Child (Key) Lock key
for three seconds.
2. Child (Key) Lock indicator shall be
turned off and the key lock shall be
cancelled.
SelfDry
(Depends on the Model)
“SelfDry” feature of your machine increases
drying efficiency of your machine and saves
energy. There are two options: "OFF" and
"ON".
To activate the feature of SelfDry:
1. Press SelfDry button. When the
function is active, the indicator
showing the selection of the function
lights up.
2. SelfDry is activated.
When you activate this function, the door
of your machine opens automatically at the
end of the washing program.
To deactivate the feature of
SelfDry:
1. Press the button of SelfDry. When the
function is deactivated, the indicator
showing the selection of the function
turns off.
2. SelfDry is deactivated.
SelfDry opens the door of the machine
at the end of the washing circle,
thanks to the "door opening shafts".
This process takes approximately 2
minutes. If the power fails while the
shafts are moving out, do not force to
close the door. When the power is back,
the process shall be completed, and
the shafts shall return to their initial
position.
The function of SelfDry may change
the duration of the selected program.
To Next Page
Loading...