ALTUS ADF140W - Programming the Washing Period; Monitoring of Program

Dishwasher / User’s Manual
31 / 41
EN
Operation of the product
Programmng the Washng
Perod
Time Delay key
You may delay the start time of the program
up to 9 hours with the Delay key. Press the
Start / Pause / Cancel key after delaying.
Program starts automatically when the
delay period is over.
With each press on the Delay key, 3-6-9
hours indicators start to flash. When you
press the Start / Pause / Cancel key while
the delay indicator you have selected is
flashing, the delay indicator illuminated
continuously and the count down starts.
When the delay period is over, the delay
indicator is turned off and the washing
program you have selected starts.
The delay indicators are turned off
if you press the Delay key while the
9-hour delay lamp is flashing. When
you press the Start / Pause / Cancel key
while the delay indicators are off, the
program you have selected shall start
without delay.
You may monitor the remaining time on
the delay from the delay indicators. For
example: When you select the 9-hour
delay option, 6-hour indicator shall
start to illuminate when the remaining
time for the start of washing program
is 6 hours.
To cancel the delay function:
When you press the Start / Pause / Cancel
key for 3 seconds while the delay function
is active, the delay process shall be
cancelled.
Startng of the program
Press the Start / Pause / Cancel key to start
your machine after selecting the program
and additional functions.
Machine softens the water as per the
hardness of the mains water. The
washing period may differ due to the
water softening process. Moreover,
program period may also change while
the program is being executed as a
result of the room temperature, mains
water temperature and the amount of
dishes.
Care to avoid opening of the door
while the machine is being operated.
If you need to open the door, stop the
machine by pressing the Start / Pause
/ Cancel key. Then open the door of
the machine. Be careful as steam
may come out when you open the
door of the machine. Press the Start /
Pause / Cancel key again after closing
the machine door. Program shall be
resumed.
To ensure that the water remaining
on the dishes and inside the machine
is completely drained and that the
water softener is removed after rinsing
operation, your machine resumes
operation at drying cycle after keeping
silent for a while.
Montorng of Program
You may monitor the current program step
of the program you have selected from the
program step monitoring indicators on the
control panel.
If the drying indicator is illuminated,
machine shall perform drying silently
for approximately 30 to 60 minutes.
After this period, the drying indicator
is turned off and End indicator shall be
illuminated. The End light is illuminated
when the washing program you have
selected is complete.