12
Photo Function
Setup a Photo Slideshow
• Select the source of the photos you wish to present in the slideshow by selecting NAND
(Internal Memory), SD or USB storage options and pressing the ► button.
• Navigate to the Photo function using the ◄ or ► arrow buttons and press the Enter
button to start the slideshow.
• During slideshow, press Setup button and select Photo Setup. This will provide you
with the various options to customize your slideshow. Browse the options using the ▲
or ▼ arrow buttons and Enter button to conrm.
Photo Setup
• In Slideshow mode, you can enter the Photo menu by pressing the Setup button to set
the slide, duration, background music, display rate and slide effect.
• To exit, press the Menu button.
To Next Page