3
How It Works
1. Connect two HDMI source devices to this product with HDMI
cables (not included).
2. Connect the 2-way source devices’ USB-A ports to the USB-B port of the switch via a USB
cable (included).
3. Connect a HDMI display device to this product with a HDMI cable (not included).
4. Connect mouse, keyboard to the USB 1.1 Type A ports and flash drive, printer to the USB
2.0 Type A ports.
Operation Guideline
1. Switch Button
Press the button on the product to switch the two signals.
2. Hotkey
Tips before using the Hotkey.
• To use Keyboard Hotkey Switching, the keyboard must be connected to the USB 1.1
Type A ports.
• The numbers “0”, “1”, “2” need to be typed on the Numeric Keypad.
• If the “Scroll Lock” key doesn’t work, you could try the “Ctrl” key instead.
• A hotkey command operation needs to be completed in 10 seconds. Every time a
hotkey command is input incorrectly, the switch emits a “drop” to indicate that the
input is successful. If the input does not emit a sound, the hotkey mode is exited.
To Next Page
Loading...
Need help?
General