IPB-5000B
2. Features
2. Features
Has a welding current monitoring function for the judgment of weld quality.
The selection from four control methods of Constant-current control, Constant-voltage
control, constant-current/constant-voltage combination control and constant-power
control is applicable for realizing the stable weld quality.
Has an interrupting function (INTERRUPT) to interrupt fusing current by externally
inputting the displacement of an electrode, etc. for stable fusing.
Weld current can be stopped when the displacement reaches the set value, because
the displacement change between electrodes generated by fusion penetration etc. is
measured (only for the model with a displacement sensor).
As an inverter is used, the power factor is high and the power condition is stabilized.
Because of the menu selection system, setting of various items can easily be done.
With four protective functions, the operator can work at ease.
・Over current detecting function
・No-current / no-voltage detecting function
・Thermostat fault detecting function
・Self diagnostics
The TFT LCD is employed. You can see monitor values of the welding current etc.
clearly from any angle.
The IPB-5000B is an inverter welding power supply designed for spot welding and
fusing.
Because of a compact design, it is easy to move and install. In addition, the monitor
function makes possible the judgment of defective or non-defective welding.
To Next Page
Loading...
