amadeus MAESTRO - Bluetooth Operation

GB - 5
EnglishNorskSvenska Dansk Suomi
Dolby Atmos®
This soundbar is equipped with a decoder
that supports Dolby Atmos audio format.
Dolby Atmos® gives you immersive listening
experience by delivering sound in three
dimensional space, and all the richness,
clarity, and power of Dolby sound. For
more information, please visit dolby.com/
technologies/dolby-atmos
AUX / OPTICAL / COAXIAL / HDMI
Operation
1 Ensure that the soundbar is connected to
the TV or audio device.
2 Press the / button repeatedly on the
soundbar or press the
AUX
,
OPTICAL,
COAXIAL, HDMI 1/2, HDMI eARC
buttons
on the remote control to select the
desired mode. The selected mode will
show on the display.
3 Operate your audio device directly for
playback features.
4 Press the
VOL
╋
/
━
button to adjust the
volume to your desired level.
Bluetooth® Operation
Pairing the soundbar with a Bluetooth® device
to listen to music:
First time pairing
1. Press the / button repeatedly on the
soundbar or press button on the remote
control to select Bluetooth® mode. The
display will show
BLUETOOTH READY
.
2. On the Bluetooth device, switch on
Bluetooth, search for and select
“
AMADEUS MAESTRO
” to start connection
3 Wait until you hear the voice prompt from
the soundbar.
4 Select and play audio files or music on
your Bluetooth device.
Pairing a new device after first time pairing:
press and hold the button on the remote
control or / button on the soundbar to
disconnect from current Bluetooth connected
devices and enter the Bluetooth pairing mode.
Follow step 2-3 to pair your Bluetooth® device.
Note:
• Compatibility with all Bluetooth® devices
is not guaranteed.