Amana 22 Cu. Ft. - User Manual

PRODUCT MODEL NUMBERS PRODUCT DIMENSIONS

LOCATION REQUIREMENTS

AFI2538AE

Electrical Requirements: A 115-volt, 60-Hz,

AC-only, 15- or 20-amp fused, grounded electrical

supply is required. It is recommended that a

separate circuit serving only your refrigerator be

provided. Use an outlet that cannot be turned

off by a switch. Do not use an extension cord.

NOTE: Before performing any type of installation,

cleaning, or removing a light bulb, turn the control

(Thermostat, Refrigerator or Freezer control

depending on the model) to OFF and then

disconnect the refrigerator from the electrical

source. When you are finished, reconnect the

refrigerator to the electrical source and reset the

control (Thermostat, Refrigerator or Freezer

control depending on the model) to the desired

setting.

Water Supply Requirements: A cold water supply

with water pressure of between 35 and 120 psi

(241 and 827 kPa) is required to operate the water

dispenser and ice maker. If you have questions

about your water pressure, call a licensed,

qualified plumber.

IMPORTANT: The pressure of the water coming

out of a reverse osmosis system going to the

water inlet valve of the refrigerator needs to be

between 35 and 120 psi (241 and 827 kPa).

If a reverse osmosis water filtration system is

connected to your cold water supply, the water

pressure to the system needs to be a minimum of

approximately 40 to 60 psi (276 to 414 kPa).

Because Whirlpool Corporation policy includes a continuous commitment to improve

our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation

Instructions packed with product. Specifications subject to change without notice.

Ref. W10175442A

09-11-08

3³⁄₄" (9.5 cm)

¹⁄₂" (1.3 cm)

overall

top of

cabinet

(including

handle)

Model # Depth Cab. Width Cab. Height Overall Height

"A" "B" "C" "D"

AFI2538AE 35-1/4" 35-5/8" 68-5/8" 70-1/8"

(89.5 cm) (90.5 cm) (174.3 cm) (178.1 cm)

To ensure proper ventilation for your refrigerator,

allow for a 1/2" (1.3 cm) space at the top and behind

the refrigerator. If your refrigerator has an ice maker,

allow extra space at the back for the water line

connections. When installing your refrigerator next to

a fixed wall, leave 3-3/4" (9.5 cm) minimum space

between the refrigerator and wall to allow the door to

swing open.

NOTE: It is recommended that you do not install the

refrigerator near an oven, radiator, or other heat

source. Do not install the refrigerator in a location

where the temperature will fall below 55°F (13°C).

Bottom Mount Refrigerator

Need help?

Do you have a question about the Amana 22 Cu. Ft. and is the answer not in the manual?

This document describes the Amana Bottom Mount Refrigerator, model AFI2538AE, providing essential information for its installation, operation, and maintenance.

Function Description:

The Amana Bottom Mount Refrigerator is a household appliance designed for food preservation, featuring a refrigerator compartment and a bottom-mounted freezer. It is equipped with a water dispenser and ice maker, requiring a cold water supply for these functions. The bottom-mount design typically places the freezer drawer below the fresh food compartment, which can offer more convenient access to frequently used refrigerated items.

Important Technical Specifications:

Electrical Requirements:

The refrigerator requires a 115-volt, 60-Hz, AC-only electrical supply. A dedicated 15- or 20-amp fused, grounded circuit is recommended to ensure optimal performance and safety. It is crucial to use an outlet that is not controlled by a switch and to avoid using an extension cord.

Water Supply Requirements:

For the water dispenser and ice maker to function correctly, a cold water supply with a pressure between 35 and 120 psi (241 and 827 kPa) is necessary. If a reverse osmosis (RO) water filtration system is connected to the cold water supply, the pressure to the RO system itself must be a minimum of 40 to 60 psi (276 to 414 kPa). The pressure of the water coming out of the RO system and going to the refrigerator's water inlet valve must also be between 35 and 120 psi (241 and 827 kPa). If there are any questions regarding water pressure, it is advised to consult a licensed, qualified plumber.

Product Dimensions (Model AFI2538AE):

Depth "A" (including handle): 35-1/4 inches (89.5 cm)
Cabinet Width "B": 35-5/8 inches (90.5 cm)
Cabinet Height "C": 68-5/8 inches (174.3 cm)
Overall Height "D": 70-1/8 inches (178.1 cm)

Usage Features:

Installation Requirements:

Proper ventilation is critical for the refrigerator's efficient operation. A minimum space of 1/2 inch (1.3 cm) should be maintained at the top and behind the refrigerator. For models with an ice maker, additional space at the back is needed for water line connections. When installing the refrigerator next to a fixed wall, a minimum clearance of 3-3/4 inches (9.5 cm) must be left between the refrigerator and the wall to allow the door to swing open freely.

Environmental Considerations:

It is strongly recommended not to install the refrigerator near heat sources such as ovens, radiators, or other heating appliances, as this can affect its performance and energy efficiency. Furthermore, the refrigerator should not be installed in a location where the ambient temperature is expected to fall below 55°F (13°C), as this could impact its ability to maintain proper internal temperatures.

Maintenance Features:

Pre-Maintenance Safety Procedure:

Before undertaking any installation, cleaning, or light bulb replacement, it is imperative to turn the control (Thermostat, Refrigerator, or Freezer control, depending on the specific model) to the OFF position. Following this, the refrigerator must be disconnected from its electrical source to prevent accidental startup or electrical shock. Once maintenance is complete, the refrigerator should be reconnected to the electrical source, and the control reset to the desired setting. This safety protocol ensures user protection during maintenance tasks.

The document emphasizes that these dimensions are for planning purposes only, and for complete details, users should refer to the Installation Instructions provided with the product. Specifications are subject to change without notice as part of Whirlpool Corporation's continuous commitment to product improvement.