Need help?Do you have a question about the Amana ABL2227FES12 and is the answer not in the manual?
General| Brand | Amana |
|---|---|
| Model | ABL2227FES12 |
| Color | Stainless Steel |
| Water Dispenser | No |
| Sabbath Mode | No |
Contains user guides, energy information, and technical sheets for the appliance.
Includes the main cabinet, plug buttons, and general structural elements.
Components for door operation, such as hinges, clips, and associated hardware.
Various screws, plugs, and labels used for assembly and identification.
Main freezer liner and foam gaskets for sealing.
Includes light housing, bulbs, sockets, and switches.
Parts related to the evaporator, fan shroud, and fan motor.
Components for drawer slides, door brackets, and basket brackets.
Temperature sensors and related components like thermistors and funnels.
The main freezer door panel, including insulation.
Handle and mounting hardware for the freezer door.
Magnetic gasket that seals the freezer door.
Removable bins or buckets typically found inside the door.
Main refrigerator liner and associated gaskets.
Parts for interior lighting and control panel housing.
Evaporator cover, damper components, and insulation.
Temperature sensing components and cosmetic plug buttons.
The main refrigerator door panel, potentially with liner.
Handle and mounting hardware for the refrigerator door.
Magnetic gasket that seals the refrigerator door.
Removable bins, retainers, and nameplate for the door.
Components that control door movement and closing action.
Includes compressor, capacitor, overload, and associated tubing.
Evaporator components, drier, and associated clips/harnesses.
Fan blade, motor, and bracket for air circulation.
Drain pan, heater, and tubing for defrost or drainage.
Various service access valves for refrigerant system.
Specification for the amount and type of refrigerant.
Tracks, rails, and glides for shelves and crispers.
Crisper drawers, humidity controls, and associated frames.
Various shelves, including can racks and pantry shelves.
Glass shelves, trim pieces, and dividers.
Main assembly for ice making, including mold and heater.
Water inlet valve, tubing, and associated brackets.
Components responsible for ejecting and stripping ice from the mold.
Icemaker harness, thermostat, and module assembly.
The entire replacement ice maker assembly.
Paints for cosmetic repairs, available in touch-up and spray forms.
Bulk paint, various sealers, and adhesives for minor repairs.
Includes vinyl tape, mastic sealer, silicone grease, and cement.
Kits for specific repairs like evaporator or terminal connectors.
Specialized tools like a Torx screw wrench.
To Next Page
