SERVICING
22
7. Select CHARGE MODE.
8. Select ON. Press DONE to initiate CHARGE MODE. (System
will then run for 1 hour and either return to cooling mode
if the thermostat is set for COOL mode, or stop if the
thermostat is set for FAN or HEAT mode.)
If charging is not complete after 1 hour, repeat 7. and 8.
Refer to S-103 for refrigerant charge level adjustment.
9. To terminate CHARGE MODE, select CHARGE MODE screen
again. Press OFF. Press DONE to terminate CHARGE MODE.
10. Once CHARGE MODE is complete and has been
terminated, navigate to HOME screen. Enter
normal operation with temperature offset or thermostat
schedule, as desired.
To Next Page
Loading...
Need help?
General
