How to stop vibrating noise from my Amana Bottom Freezer?
If your Amana Refrigerator is making a vibrating noise, it might not be level. See the Installation Instructions for details on how to level your unit.
Why is the crisper drawer temperature too warm in my Amana Bottom Freezer?
If the crisper drawer temperature in your Amana Refrigerator is too warm, the control settings might be too low. See the section on the Crisper drawer to adjust the controls. Also, check if the freezer controls are set too low, referring to the controls section in the Owner’s Manual. Finally, verify that the drawer is properly positioned by consulting the Crisper drawer section.
Why is ice forming in the inlet tube to the ice maker of my Amana Refrigerator?
If ice is forming in the inlet tube to the ice maker of your Amana Refrigerator, it could be due to low water pressure. The water pressure must be between 20 to 100 pounds per square inch to function properly. It could also be that the freezer temperature is too high. See the controls section in the chapter called 'Installing Your Refrigerator' on how to adjust your controls.
General| Type | Bottom Freezer Refrigerator |
|---|---|
| Brand | Amana |
| Energy Star Certified | Yes |
| Defrost Type | Frost-Free |
| Shelves | 3 Glass |
| Crisper Drawers | 2 |
Locate and record your refrigerator's model and serial number for service.
How to adjust and set the temperature controls for both sections.
Guidance on setting optimal temperatures for fresh food and freezer compartments.
How the automatic ice maker works, including installation and operation.
Instructions for cleaning the condenser coil for optimal efficiency.
Steps for safely replacing fresh food and freezer light bulbs.
To Next Page