A
Austin SmithAug 14, 2025
What to do if ice cubes are jammed in my Amana B136CAL3 Refrigerator?
- LLogan GibsonAug 14, 2025
If the ice cubes are jammed in your Amana Refrigerator, un-jam the cubes and check the fill tube and fill-cup assembly.
To Next PageTo Next PageWhat to do if ice cubes are jammed in my Amana B136CAL3 Refrigerator?
If the ice cubes are jammed in your Amana Refrigerator, un-jam the cubes and check the fill tube and fill-cup assembly.
What to do if the water pressure is low in my Amana B136CAL3?
If you're experiencing low water pressure in your Amana Refrigerator, short the “T” & “H” test points for 10 seconds, then remove the jumpers and catch water in a glass. You may need to increase the water pressure to between 20 - 120 psi (1.4 - 8.2 bar), aiming for about 140 cc's of water.
What to do if there is no power to the water valve in my Amana Refrigerator?
If there's no power to the water valve in your Amana Refrigerator, determine the discontinuity by tracing the power.
What to do if there is no power to the ice maker harness in my Amana Refrigerator?
If there's no power to the ice maker harness in your Amana Refrigerator, determine the discontinuity by tracing the power.
What to do if the water line is kinked in my Amana B136CAL3?
If the water line in your Amana Refrigerator is kinked, un-kink the line and check it for weak sections.
What to do if the motor is stalled or stripped in my Amana B136CAL3?
If the motor is stalled or stripped in your Amana Refrigerator, replace the module.
What to do if the module shut-off switch and contacts are shorted and burned in my Amana B136CAL3 Refrigerator?
If the module shut-off switch and contacts are shorted and burned in your Amana Refrigerator, replace the module.
What to do if the module is contaminated and the motor won't run when “T” and “H” test points are shorted in my Amana B136CAL3?
If the module is contaminated and the motor won't run when the “T” and “H” test points are shorted in your Amana Refrigerator, replace the module.
What to do if the locking tab on the vertical cam is broken in my Amana B136CAL3 Refrigerator?
If the locking tab on the vertical cam is broken in your Amana Refrigerator, replace the module.
General| Brand | Amana |
|---|---|
| Model | B136CAL3 |
| Category | Refrigerator |
| Configuration | Top Freezer |
| Energy Star Certified | No |
Diagram of the display panel's button layout and functions.
Details on how each key on the display panel operates.
Location and function of the power disconnect switch.
Function of the showroom switch for independent operation.
Description of various alarm types and their triggers.
Features and operations available in Program Mode A.
Features and operations available in Program Mode B.
Choosing between adaptive and conventional defrost modes.
Initiating a forced defrost cycle.
Procedure to manually start the defrost cycle.
Procedure to manually start the compressor.
How to detect an open thermistor circuit.
How the ice maker functions and its components.
Technical details and ratings for ice maker parts.
Methods for testing the ice maker's functionality.
Procedures for disassembling specific ice maker assemblies.
Procedure for removing and installing ejector blades.
How to access the ice maker's control box.
Adjusting the water fill volume for the ice maker.
Troubleshooting issues related to water quality and flow.
Diagnosing issues caused by incorrect freezer temperatures.
Procedure for replacing the ice maker thermostat.
Information on the water valve's function and specifications.
Details about the wiring harness, including the thermal fuse.
Common problems and solutions for lack of ice production.
Troubleshooting issues at 3:00 and 4:00 ejector positions.
Troubleshooting issues at 6:00 and 7:30 ejector positions.
Troubleshooting issues at the 9:00 ejector position.
Common problems and solutions for producing too much ice.
Troubleshooting causes of hollow ice cubes.
Solutions for ice maker flooding or ice in the freezer.
