Need help?Do you have a question about the Amana L-90 and is the answer not in the manual?
Essential safety guidelines for operating and servicing the Amana compact washer.
Overview of the Amana compact washer, its features, and capabilities.
Details on the washer's control panel layout and its various functions.
Instructions on how to properly use the detergent, bleach, and fabric softener dispensers.
Information on where to find the model and serial number labels on the appliance.
Guidance on locating the technical service sheet for the washer.
Explanation of the coding system used for model and serial numbers.
Technical details and specifications for the Amana compact washer.
Overview of the control panel as it relates to diagnostics and troubleshooting.
Initial checks and guidelines before performing diagnostic tests.
Instructions for entering and using the manual test mode for diagnostics.
Procedure for testing the spin function of the washer.
Procedure for testing the lid switch mechanism.
Procedure for testing the User Interface (UI) and LED indicators.
Procedure for testing specific components using the manual load test.
List and explanation of error codes displayed by the washer.
A comprehensive guide to diagnosing and resolving common washer problems.
Safety precautions to be followed before and during component testing.
Schematic illustrating the electrical connections of the washer components.
General introduction to component testing procedures.
Procedure for testing the User Interface and Control Board.
Procedure for testing the hot and cold water inlet valves.
Procedure for testing the water level pressure sensor.
Procedure for testing the User Interface LEDs and buttons.
Procedure for testing the drain pump functionality.
Procedure for testing the drive motor and start capacitor.
Procedure for testing the shifter motor and brake mechanism.
Procedure for testing the out-of-balance switch.
Procedure for testing the lid lock assembly and switch.
List and diagrams of top and control panel parts and assemblies.
List and diagrams of cabinet and external parts and assemblies.
List and diagrams of internal basket and gear train components.
Visual identification of components located on the washer's top surface.
Visual identification of components located beneath the washer's top panel.
Visual identification of components accessible from the rear of the washer.
Visual identification of components located under the top rear cover.
Essential safety guidelines for operating and servicing the Amana compact washer.
Overview of the Amana compact washer, its features, and capabilities.
Details on the washer's control panel layout and its various functions.
Instructions on how to properly use the detergent, bleach, and fabric softener dispensers.
Information on where to find the model and serial number labels on the appliance.
Guidance on locating the technical service sheet for the washer.
Explanation of the coding system used for model and serial numbers.
Technical details and specifications for the Amana compact washer.
Overview of the control panel as it relates to diagnostics and troubleshooting.
Initial checks and guidelines before performing diagnostic tests.
Instructions for entering and using the manual test mode for diagnostics.
Procedure for testing the spin function of the washer.
Procedure for testing the lid switch mechanism.
Procedure for testing the User Interface (UI) and LED indicators.
Procedure for testing specific components using the manual load test.
List and explanation of error codes displayed by the washer.
A comprehensive guide to diagnosing and resolving common washer problems.
Safety precautions to be followed before and during component testing.
Schematic illustrating the electrical connections of the washer components.
General introduction to component testing procedures.
Procedure for testing the User Interface and Control Board.
Procedure for testing the hot and cold water inlet valves.
Procedure for testing the water level pressure sensor.
Procedure for testing the User Interface LEDs and buttons.
Procedure for testing the drain pump functionality.
Procedure for testing the drive motor and start capacitor.
Procedure for testing the shifter motor and brake mechanism.
Procedure for testing the out-of-balance switch.
Procedure for testing the lid lock assembly and switch.
List and diagrams of top and control panel parts and assemblies.
List and diagrams of cabinet and external parts and assemblies.
List and diagrams of internal basket and gear train components.
Visual identification of components located on the washer's top surface.
Visual identification of components located beneath the washer's top panel.
Visual identification of components accessible from the rear of the washer.
Visual identification of components located under the top rear cover.
To Next Page
General
