Need help?Do you have a question about the Amana LWA50AW and is the answer not in the manual?
Addresses problems with the water fill level stopping incorrectly.
Troubleshooting steps for a timer that fails to advance through cycles.
Steps to diagnose and fix a washer where the motor does not operate.
Troubleshooting guide for situations where the washer does not agitate.
Steps to resolve issues causing continuous agitation.
Diagnosing overheating, smoking, and motor protector issues.
Troubleshooting problems with slow or absent spinning cycles.
Steps to fix a washer that is stuck in a continuous spin cycle.
Resolving issues where the washer stops mid-cycle or after a few loads.
Troubleshooting a washer that is mechanically locked or binding.
Steps for diagnosing and troubleshooting issues with the electronic control system.
Explains how to run and interpret the diagnostic cycle for electronic controls.
Lists common failure symptoms and their potential causes and solutions.
Troubleshooting guide for a flashing display error.
Troubleshooting steps for a tripped breaker or blown fuse.
Diagnosing problems with water fill and temperature selection.
Troubleshooting steps for agitation issues.
Diagnosing and resolving problems with the spin cycle.
Troubleshooting the "bF" error code displayed on the unit.
Troubleshooting the "rF" error code displayed on the unit.
Diagnosing "oF" or "SH" error codes related to temperature.
Procedures for replacing the electronic control unit.
To Next Page
General
