Amana RCS10TS - Model Identification

2
Warranty service must be performed by an authorized
ACP servicer. ACP also recommends contacting an
authorized ACP servicer if service is required after
warranty expires.
Model Identication
When contacting ACP, provide product information. Product information is located on oven serial plate which is
located on the back side of the oven. Record the
following information:
Model Number: _____________________________
Manufacturing Number: _______________________
Serial or S/N Number: ________________________
Date of purchase: ___________________________
Dealer’s name and address: ___________________
__________________________________________
__________________________________________
__________________________________________
Any questions or to locate an authorized ACP servicer,
call toll free 1-866-426-2621 inside the U.S.A or Canada,
or 1-319-368-8120 outside the U.S.A or Canada.