4
Spillsaver
Shelves
Caution
To avoid personal injury or property
damage, handle tempered glass shelves
carefully. Shelves may break suddenly if
nicked, scratched or exposed to sudden
temperature change.
1. Remove shelves by lifting front and releasing
hooks from metal track.
2. Replace shelves by inserting hooks into metal
track and lowering front.
Chiller Fresh System
Locate control on front trim to adjust amount of air
circulating between drawer and sleeve.
Garden Fresh Crispers
Locate control on front trim to adjust to either high or
low settings.
1. Remove drawers by lifting and pulling out.
Refer to "Spillsaver
Shelves" for instructions
on removing and replacing shelf.
2. Replace drawers by sliding in.
Dairy Center
1. Remove door by opening door, pushing in
slightly near hinges and pulling out.
2. Remove shelf by lifting and pulling out.
3. Replace door and shelf by reversing steps 1-2.
Snack Chiller
1. Remove door by opening door, pushing in
slightly near hinges and pulling out.
2. Remove bucket by removing Beverage Chiller
door then lifting bucket.
3. Replace door and bucket by reversing steps 1-2.
1. Remove drawer and sleeve by lifting and pulling
out. Refer to "Spillsaver
Shelves" for
instructions on removing and replacing shelf.
Use eighth through eleventh slots.
2. Replace sleeve then drawer by sliding in.
Confirm boot is over air inlet in side wall.
To Next Page
Loading...
Need help?
General
