AFR-100 Installation & Operation Guide Page 13
User Management
New Users
1. Go to the main menu and select User Mgt.
2. Select New User
3. Select User ID - enter the User ID by using the keypad and then
pressing OK.
4. Click on Face
5. Focus your eyes inside the green box
6. Follow verbal instructions from the terminal until your face has
been verified. The Terminal will respond with “Thank You” to let
you know this has been completed.
Confirmation of Face Verification
To confirm that you have successfully enrolled your face use the
back arrow to revert back to the AMANO screen.
From the AMANO screen, face forward and look directly at the
screen. At the top of the screen it will say “Face Detection Start”.
Hold still in front of the screen as it counts down on the screen from
>4< to >1<. Once the countdown is complete the terminal will
instruct you that you have been “Verified by Face”.
To Next Page
Loading...
