AFR-100 Installation & Operation Guide Page 9
The front panel of the AFR-100 terminal contains the following controls:
• LED Indicator: During normal standby operation (power on), the Green LED will flash
once per second, and stay on momentarily when a user is successfully verified. If a user
fails to verify, the Red LED will stay on momentarily.
Note: If the face scan reader does not follow the standard LED operational
parameters, please consult support.
• Speaker: Provides audible voice verification of operations, i.e., "Thank you", "Incorrect
Password", "Access Denied", "Invalid Id", "Please try again", etc.
• TFT Display: Displays time, date, day, and operational information.
• Camera - Face Scan Sensor: Enrolls (creates) template and verifies face scan.
• ID Swipe Card Area – Proximity card must be presented approximately 1 inch in front of
the reader to punch.
• Keypad: Used to input User ID, password, and perform menu operation
Understanding the AFR-100 Terminal Front Panel
Front View
Side View
USB Port
Reset Button
Speaker
LED Indicator
Touch Screen
Touch Keys
Camera
ID Swipe Card
Area
Keypad Icon
To Next Page
Loading...
