AFR-100 Installation & Operation Guide Page 20
Backup Data
1. Select Backup Data
2. Next click on Backup to Device
3. From here you can choose the local configuration items
to be backed up to your device. Next, select the content
you want to backup.
4. Select Backup Start - This will enable Backup to a
USB Disk in a fashion similar to the operations
performed to “Backup to Device”.
If the USB is not properly inserted the screen will read
“Error – Failed to Read USB Disk”. If this happens change
the USB or try to reinsert it properly.
Restore Data
1. Select Restore Data
2. Click on Restore from Device and select the local
configuration items to be restored, and then save the
selected items. (You can select the content you want to
restore.)
3. If you choose “Restore from USB Disk” the operations
are similar to those performed to “Restore from Device”.
If the USB is not properly inserted the screen will read
“Error – Failed to Read USB Disk”. If this happens change
the USB or try to reinsert it properly.
.
To Next Page
Loading...
