Page 16 of 37 © Copyright 2015 Amano McGann, Inc. 4000_Operations_06122015
[Fig. 2.4B] Arming loop is active
2. Press the Lost Ticket button on the Terminal to indicate the ticket has been
lost. The lost ticket fee is displayed.
Note: The Lost Ticket button can be configured in multiple
methods. The first method is a flat fee. A flat fee is a pre-
determined number configured by the rate file within the
Terminal. The second method is a negotiated fee. A negotiated
fee is a fee negotiated by the patron and facility employee using
the Terminal intercom to negotiate the fee.
3. The voice prompt will play the message, “The fee is xxx dollars. Please pay
the parking ticket by credit card (OPUS-4700), store validation coupon, or
FlexScan validation coupon” (if option installed)
4. Insert the payment
5. After the payment has been received, the Terminal will vend the gate.
6. When the “C” loop senses a vehicle, the Terminal return back to the idle
screen. The shutter on the ticket acceptor is closed.
2.5 Proximity Access (with Proximity Reader Option)
This procedure describes the proximity card access process.
Prior to arming, the Terminal will display the Idle screen.
To Next Page
Loading...
