Page 27 of 37 © Copyright 2015 Amano McGann, Inc. 4000_Operations_06122015
5.2 Page Two
Error/Warning: Errors encountered during Terminal operation.
Ticket Data Check: Read the data encoded on a thermal data matrix ticket.
Exit Mode: Determine when the gate is vended.
Password Release: Clear a management password.
Staff Operation: Navigate to the Staff Operation menu.
Mgmt. Operation: Navigate to the Management Operation menu.
5.2.1 Navigate to Page Two
Navigate to page two of the Initial Operation menu by pressing Vol Up on the
remote.
5.2.2 Check for Errors and Warnings
Enter the Errors/Warnings menu by pressing 1 on the remote.
Any errors encountered during normal Terminal operation are displayed in the
Errors/Warnings window. Scroll through the errors by pressing Vol Down for
previous errors or Vol Up for the next errors.
5.2.3 Reading Encoded Ticket Data
The OPUS-4000 Series has the ability to read and display data printed on OPUS-
2000 Series entry tickets. Press 3 on the remote to enter the Ticket Data Check
menu.
The ticket shutter will open once the Ticket Data Check menu has loaded. Insert
an OPUS-2000 encoded ticket into the Exit Terminal ticket throat.
A standard entry ticket will contain the machine number, lot number, rate letter,
ticket number, customer code, and entry date and time. The ticket type is
displayed near the top of the display.
5.2.4 Configuring the Gate Vend Operation
The Exit Terminal can vend the gate once the ticket is paid, or vend the gate
automatically without a payment. Press 4 to enter the Exit Mode menu.
Press 1 for a paid exit mode or press 2 for a free exit/automatic vend mode.
To Next Page
Loading...
