Amarey A90 - Setting Up the Robot

②. Preparations
󽧐
1
󽧑
Position the Charging Base on a hard level surface and against a wall.
Ensure the place is an open & uncluttered area leaving at least 4ft in the front and 1.6ft on both sides.
󽧐
2
󽧑
Connect the round end of the adapter into the power socket on the Charging
Dock and the other end into a wall outlet. When connect well, the white light will
be on. Otherwise, the robot can’t dock.
Connect the round end of the adapter into the power socket on the Charging
Dock and the other end into a wall outlet. When connect well, the white light will
9