Need help?Do you have a question about the AMAV MACRO80P and is the answer not in the manual?
Provides an overview of the AMAV Micro20 speakers and Macro80P powered sub woofer system.
Details the connections and controls found on the rear panel of the unit.
Presents technical drawings and dimensions for speaker bracket and wall plate mounting.
Lists the technical specifications for the speaker system components.
Sets the overall output volume for all speakers, affecting sub and satellite levels.
Allows individual level adjustment for each satellite speaker output.
Accepts balanced and unbalanced stereo line level inputs for audio signal.
Selects between stereo input or internally summed mono signal for all speakers.
Connects the MICRO20 satellite speakers; signal is high-pass filtered at 80Hz.
Main switch to turn the internal amplifier power on or off.
Illuminates when power is available and the unit is operational.
Standard IEC connector for mains power connection and fuse rating.
RJ45 connector for the WMVC remote wall mount volume controller.
Adjusts bass frequencies using a low shelf EQ at 100Hz.
Adjusts treble frequencies using a high shelf EQ at 10kHz.
Sets system output volume, affecting both sub and satellite speaker levels.
Technical drawings and dimensions for mounting the Micro20 speaker bracket.
Mounting dimensions and centers for the WMVC remote wall mount volume controller.
Technical specifications for the Macro80P powered sub woofer, including power, sensitivity, and dimensions.
Technical specifications for the WMVC remote volume controller, including EQ and cabling.
General| Brand | AMAV |
|---|---|
| Model | MACRO80P |
| Category | Speaker System |
| Language | English |
To Next Page