Getting started
Connecting and pairing
Use your phone to scan the following QR code, and download and install the Zepp app. For a better user
experience, update this app to the latest version when prompted.
Note: The operating system of your mobile phone must be Android 5.0 or iOS 10.0, or higher.
Initial pairing:
When the watch is started for the first time, the QR code used for pairing is displayed on the screen.
Launch the Zepp app on your phone, log into the app, and scan the QR code displayed on the watch to pair your
phone with the watch.
Pairing with a new phone:
1. Launch the Zepp app on your old phone, and synchronize data with the watch.
2. On your old phone, go to the information page of the watch, tap More at the bottom of the page, and unpair
the old phone from the watch.
3. Restore the factory settings of the watch, and restart the watch. After the watch is restarted, pair the watch
with your new phone according to the initial pairing procedures.
Updating the system of your watch
Keep the watch connected with your phone, launch the Zepp app, and choose Profile > My devices > Amazfit X >
Check for updates. Then, you can view or update the system of your watch.
To Next Page
Need help?
General
