5
EN
Mode Maximum Input
A~, A 10 A, 1000V fast
acting fuse (max.
30seconds every
15minutes)
mA~, mA 800 mA, 1000V fast
acting fuse
V~, V 1000 V ~ / RMS
Frequency,
Resistance,
Capacitance, Diode
Test, Continuity
250 V ~ / RMS
Surge Protection: 8 kV peak per IEC 61010
• Do not measure current on a CAT III circuitry
whose voltage exceeds 1000 V.
• Do not measure current on a CAT IV circuitry
whose voltage exceeds 600 V.
• When measuring volts, do not switch to
current/resistance modes.
• Set the function switch to the appropriate
position before measuring.
• Set the function switch (K) to the OFF position
when not in use.
To Next Page
Loading...
