20
EN
• Connect the test probes (S) in parallel to the
circuit under test.
• The stabilized value on the display (F) is read as
the actual reading.
Measuring AC voltage peaks
• In AC voltage measurement mode, press the
PEAK/INRUSH button (L) to measure the
maximum peak and minimum peak values.
• Press the PEAK/INRUSH button (L) to switch
between the maximum (MAX) and minimum
(MIN) measured value. The appropriate MAX/
MIN indicator (8) appears.
• Press the PEAK/INRUSH button (L) for
2seconds to return to normal operation.
The MAX/MIN indicator (8) disappears.
VFD mode (variable-frequency drive)
NOTICE
The VFD mode filters out noise
to provide a more stable reading when testing
variable frequency motor drives.
NOTICE
The VFD mode measurement range
is 100 V to 600 V AC.
To Next Page
Loading...