55
Connect to Wi-Fi
Connect to a Wi-Fi network to buy, stream, or download content from the Cloud, or sync to receive items.
Your Fire phone automatically detects nearby Wi-Fi networks and wireless hotspots that broadcast their
network name. Some networks are open for everyone to join, while others require a password to connect.
You can connect your phone to your home Wi-Fi network, public Wi-Fi networks, and some enterprise
private networks.
Tip: With AT&T Wi-Fi service, you can connect to an AT&T Wi-Fi Hot Spot location on your Fire phone.
To learn more about AT&T Wi-Fi Hot Spots, visit their website
(https://www.att.com/esupport/article.jsp?sid=KB100853).
1. Swivel the phone or swipe down from the top of the screen to open the Quick Actions panel.
2. From the Quick Actions panel, press and hold the Wi-Fi icon.
3. Next to Wi-Fi, tap On.
4. Tap a network to connect to it. If you see a lock icon besides the network name, a network password is
required. Enter the Wi-Fi network password, and then tap OK.
Note: If you don't know the password, check with the person who set up the network. This password is not
your Amazon account password.
After you connect to a Wi-Fi network, your phone automatically connects to the network again when it's in
range. If more than one network is in range, your phone automatically connects to the last network used.
To Next Page
Loading...