16
Setup Instructions
Connecting the Sound Bar
Disconnecting Bluetooth devices
• Turn off the Bluetooth function on the paired device.
Reconnecting to a paired device
When the sound bar is not paired to a device, the Bluetooth indicator light turns off.
• Turn on the sound bar. The sound bar will search for the last connected Bluetooth device and
will reconnect.
• When the Bluetooth device is within 30 feet (9 m) from the sound bar, it will reconnect.
Positioning the sound bar
• Set the sound bar on a flat surface. Do not place it near the edge of a surface to ensure that its
positioning is secure and it will not tip over.
• The sound bar can be mounted on a wall. Please refer to the mount template provided for more
details. Also refer to the chapter “Wall Mounting the Sound Bar “.
Listening to the sound bar
• Press the power button to turn on the sound bar. The power button will turn from red to blue.
• Press the audio source button on the sound bar repeatedly to choose the selected audio
source or use the audio source button on the remote control.
• Press the DSP sound mode button at the top of the sound bar repeatedly to select a sound
mode or use the DSP sound mode button on the remote control. The three DSP sound modes
are: Standard, News or Movie.
• Adjust the volume on the sound bar or remote control to a comfortable level.
• Press the power button again to turn off the sound bar. The power button will turn red.
To Next Page
Loading...
Need help?
General