9ENGLISH
Français
Español
English
Maintenance
Shredder
Oil
DO NOT USE
AEROSOL PRODUCTS!
FIGURE 3
! Caution:
Warning: Failure to properly maintain your shredder will void the warranty.
Oil the shredder blades every month with basic vegetable, cooking oil or shredder oil. Follow
oiling procedure below (FIGURE 3). It helps to keep the shredder blades operating well over
many years of use.
Oiling procedure:
1. Turn off shredder.
2. Apply shredder oil across feed slot.
3. Turn shredder in reverse mode for 3~5
seconds.
Note: Shredder oil is NOT included.
• Do not spray or keep any aerosol products
in or around shredder.
• DO NOT USE CANNED AIR ON SHRED-
DER.
Cleaning:
•Never use anything flammable to clean the shredder. This may result in serious injury
or damage to the product.
•ALWAYS UNPLUG THE SHREDDER BEFORE CLEANING!
•Only clean the shredder by carefully wiping the unit with a dry soft cloth or towel.
•Do not clean or immerse shredder in water. Having the unit wet may result in damage or
malfunction to the electrical components. If the shredder happens to get wet, be sure to
completely dry the unit immediately with a cloth or towel.
To Next Page
Loading...
Need help?
General
