EN
11
Adjusting the Settings
Short press or push the control button up, down, left, or right to open the main menu. Use
the options in the following Picture, Color, Audio, Gaming, OSD (on-screen display), System,
and Information menus to adjust your monitor’s settings.
When youre nished, press the control button left repeatedly to exit the main menu. See
“Using the Control Button” for more information on navigating the menu.
Picture
» Modes: Optimize picture quality for general content. Choose between Action, Racing,
Sports, User, Standard, ECO, Graphics, or HDR.
» Brightness: Adjust the balance between light and dark shades. Choose a setting from 0
(dimmest) to 100 (brightest).
» Contrast: Adjust the degree of dierence between light and dark areas. Choose a setting
from 0 (least contrast) to 100 (most contrast).
» Black Boost: Boost the amplitude of the dark color levels of the display, making blacks
less black. The higher the level, the higher the boost.
» Blue Light: When turned on, this lters out blue light by adjusting the ratio of blue light
that is displayed.
» DCR (Dynamic Contrast Ratio): Adjust the backlight based on what is displayed on your
screen.
» HDR (High Dynamic Range): Adjust the HDR auto or o. The default is o.
Color
» Gamma: Adjust the luminance tone. The default value is 2.2 (standard value for
Windows).
» Color Space: Choose sRGB, Rec. 709, HDR, EBU, SMPTE-C or Standard. Default is
standard.
» Color Temp.: Change the color temperature. Choose between Warm, Normal, Cool or
User. The default is Warm.
Audio
» Volume: Adjust the volume.
» Mute: Turn the sound on or o.
Gaming
» Over Drive: Prevent motion blur in fast-moving images. Choose between O, Normal, or
Extreme.
» Adaptive-Sync: When turned on, this eliminates tearing and stuttering. The default is
On.
» MPRT: Turn MRPT on or o. The default is o.
» Refresh Rate Num: Display the screen’s current refresh rate.
» Aim Point: Show an Aim point of the screen for shooting games.
Swiveling
Swivel the monitor for the most comfortable viewing angle, up to 45° to the left or right.
Installing a Cable Lock
The monitor can be secured to a xed object with a cable lock (not included).
Using the Control Button
Use the control button to navigate the monitor’s main menu:
» Short press: Turn monitor on or open the menu when the monitor is turned on.
» Long press: Turn monitor o
» Up/Down/Left/Right: Press to open the menu, then use the directional arrows to adjust
settings. When nished, press Left to go back a level until the menu is closed.
45°45°
Control button
To Next Page
Loading...