1 - 4
KE/KG 2/3 b144-1 03.99
6.5 Putting the pto shaft
into operation ........................................................................................6
6.6 Standstill of the tines
while working ........................................................................................7
6.7 Taking the universal joint shaft
out of operation
after work ............................................................................................... 8
7.0 Attaching the
AMAZONE-roller and
setting the working depth of the soil tillage implement..................... 1
7.1 Attaching the
tooth packer rollers
PW 420 and PW 500
and support rollers SW..........................................................................1
7.2 Attaching the
tyre packer rollers RP
and wedge ring rollers KW....................................................................3
7.3 Setting the working depth of the soil tillage implement ........................ 5
9.0 Gearbox ................................................................................................ 1
9.1 Tine speed............................................................................................. 1
9.2 Tractor's pto shaft speed........................................................................ 1
9.3 Pto-shaft through drive ..........................................................................2
9.4 Exchange rear main gearbox ...............................................................3
9.4.1 Speed table
for exchange gear main gearbox .......................................................... 4
9.4.2 Replacing
exchange gear wheels in the main exchange gear wheel gearbox .... 6
9.4.3 Pto-shaft through drive on the exchange gear main gearbox ..............8
9.4.4 Angle power take-off
for AD-P blower fan ...............................................................................8
9.4.5 Fitting the
pto shaft through drive
and the angle power take-off ................................................................9
9.5 Two-speed shift main gearbox
with exchange gear wheels .................................................................10
9.5.1 Pto-shaft through drive on the two-speed shift main gearbox ............11
9.5.2 Speed table for the
two-speed shift main gearbox .............................................................. 11