Need help?Do you have a question about the Amazone UF 02 Series and is the answer not in the manual?
General| Brand | Amazone |
|---|---|
| Model | UF 02 Series |
| Category | Paint Sprayer |
| Language | English |
Describes the operation and maintenance of the implement.
All direction information is viewed in the direction of travel.
Explains instructions, responses, listings, and item numbers.
Indicates safety notices using triangular symbols and signal words.
Specifies the valid software version for the operating manual.
Illustrates the structure and navigation of the ISOBUS software.
Describes how to access the Field and Settings menus.
Operates the implement on the field with its sub-menus.
Explains the distribution and assignment of function fields.
Details the information displayed on the terminal screen.
Step-by-step guide for operating the implement.
Shows a section of the Work menu in Section Control.
Covers various functions available within the Work menu.
Details how to switch Section Control on and off.
Explains how to switch the work lights on or off.
Manages spray quantity and target rate.
Guides on switching off outer boom sections for targeted spraying.
Controls boundary, end, and extra nozzles for spraying.
Enables selection between band spraying and area spraying.
Configures nozzle bodies and selection modes.
Controls the operation of the hydraulic pump.
Manages the flushing water pump operation.
Manages front tank operations and FlowControl.
Covers boom folding and ride functions (Profi/Flex).
Enables automatic adjustment of boom height and tilt.
Allows manual adjustment of boom height.
Details the folding process for Flex-folding booms.
Details the folding process for Profi-folding booms.
Manages pre-selected boom kinematics functions.
Controls axle functions like steering and suspension.
Manages automatic steering and axle positioning.
Controls the implement's spring suspension system.
Manages the filling and refilling process of the tanks.
Controls the agitation intensity and operation.
Provides options for cleaning the implement.
Details intensive and quick cleaning procedures.
Procedure for flushing the sprayer boom.
Instructions for diluting spray liquid.
Advanced cleaning procedure for the implement.
Accesses meter readings, weather data, and job documentation.
Displays worked area, time, and sprayed quantity.
Details how to enter and transmit weather data.
Entry of implement-specific data or individual data.
Save personal profiles with settings for terminal and implement.
Displays software versions and total area output.
Select the source for the implement speed signal.
Configure front tank, fill level, and flow meters.
Manages manual working position and manual folding.
Manage profiles: create, copy, delete, activate.
Assign different displays to the multi-function display fields.
Freely assign functions to selectable function fields.
Select functions that can be started collectively.
Configure fill level, pressure, and pump speed alarm limits.
Set dynamic speed regulation and pump speeds.
Adjust working height, boom headlands, and guidance sensitivity.
Configure quantity increments, start-up ramp, and headland pressure.
Set working width, number of sections, and section division.
Configure nozzle bodies, automatic selection, and edge nozzles.
Fit nozzle bodies according to combinations and sizes.
Configure CurveControl, Dosing, and nozzle selection.
Select required nozzles or combinations for operation.
Allocate boundary and extra nozzles.
Configure AmaSelect for band spraying applications.
Create and configure filling profiles for automatic filling.
Switch Section Control, select terminal, document data.
Configure reverse driving, slope steering, and ridge planting.
Displays all software versions of the implement.
Displays the recorded error messages.
Lists all participants in the ISOBUS network.
Displays diagnostic data, requires password.
Basic implement settings, requires Customer Service access.
Explains different message types and acknowledgement.
Enables operation without a speed signal using simulated speed.
Lists faults, their causes, and recommended remedies.
Describes the use of the AMACLICK control box.
Explains how to attach the AMACLICK control box.
To Next Page