Need help?Do you have a question about the Amazone UG 2200 Nova and is the answer not in the manual?
General| Brand | Amazone |
|---|---|
| Model | UG 2200 Nova |
| Category | Paint Sprayer |
| Language | English |
Describes the intended use and application scope of the trailed sprayer.
Specifies the exclusive operation conditions for the AMAZONE UG Nova trailed sprayer.
Advises on potential damage from specific crop protection agents to sprayer components.
Outlines risks associated with ignoring safety advice and potential consequences.
Specifies requirements for machine operators regarding knowledge and training.
Explains the different symbols used for safety and operational advice.
Describes the meaning and importance of pictographs displayed on the machine.
Emphasizes the importance of operating the machine safely and adhering to regulations.
Provides general safety and accident prevention advice for the operator.
Describes NG and TG control units, switch boxes, and associated computer equipment.
Details the liquid flow configurations for single and dual pump systems.
Explains filter equipment and agitator systems, including self-cleaning filters and agitation types.
Covers different types of draw bars, nozzles, and their specific options.
Guides on installing the main console, bracket, and battery cable for the switch box.
Important information regarding the PTO shaft, including fitting, maintenance, and safety.
Detailed instructions for correctly fitting and matching the universal joint shaft halves.
Step-by-step guide for attaching and detaching the various draw bar types.
Instructions for coupling the dual circuit air brake system to the tractor.
Explains the hydraulic brake system and its connection to the tractor.
Describes the sprayer's compatibility with two-circuit air or hydraulic brake systems.
Provides a formula and example for calculating the sprayer's payload.
Detailed instructions on preparing the spray mixture according to agent manufacturer's advice.
Provides examples and formulas for calculating spray mixture quantities for different scenarios.
Explains how to induct spray agents into the tank, noting differences for liquid and powdery agents.
Procedure to set the equal pressure control chest for the NG control unit before first operation.
Comprehensive guide on spraying crop protection liquids, including pre-spraying checks and procedures.
Details the process of calibrating the sprayer for accurate application rates.
A checklist for daily, monthly, and annual maintenance tasks for the sprayer.
Covers pump maintenance, oil level checks, cleaning, and troubleshooting.
Covers maintenance and troubleshooting for switch boxes, AMACHECK, SPRAYCONTROL, and AMATRON computers.
Explains the importance of calibrating the flow meter annually and after specific events.
Information on nozzle types, fitting, and diaphragm valve maintenance.
Details Q-booms up to 15m, including swing compensation and height adjustment.
Instructions for folding the booms in and out, including safety warnings.
Explains the hydraulically folding Q-booms and their tractor requirements.
Instructions for locking and unlocking the boom swing compensation for transport.
Details the electric boom tilting special option and its actuation via switch box.
Describes Q-plus booms with hydraulic folding, swing compensation, and height adjustment.
Details the Super S-Boom, hydraulically foldable without Profi-Folding, and tractor requirements.
Provides basic technical data for the implement and running gear, including tank volume, dimensions, and weights.
Technical data related to different tyre sizes, axle loads, and air pressures.
Technical specifications for NG and TG control units, including features and compatible computer equipment.
Technical data for Q-booms and Q-plus booms, covering working width, sections, transport width, length, height, weight, and surplus amount.
Technical data for Super-S booms, including working width, sections, transport width, length, height, weight, and surplus amount.
Provides a spray rate chart for various nozzles at a 50 cm spraying height.
Guides on how to determine the correct spraying pressure using the spray rate table.
Spray rate tables for yellow, red, and blue 3-ray nozzles at 120 cm height.
Discusses options for applying liquid fertilizers, including types and principles.
Explains the advantages and use of 3-ray nozzles for liquid fertilizer application, noting limitations.
Describes 5- and 8-hole nozzles, their sideways jet openings, and available metering discs.
Explains the Trail-Tron system for automatic draw bar angle control and track following.
Details the Trail-Control unit for straight and hitch draw bars, controlled via UX-Pilot.
Explains the DUS system for permanent circulation in spraying lines, reducing undilutable residual amount.
To Next Page