AFTER SALES SUPPORT
USA
Safety
9
USA
866-235-5029
info@customercareusa.com
manufacturer, its customer service team or a similarly
qualified person to avoid risks.
− Never operate the multi-slicer when it has a damaged
cord or plug, when it is not working properly, after it has
been dropped or damaged, or after it has been dropped
into water. Return the multi-slicer to a service center for
examination and repair.
− If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
− Plug the cord into a socket only when the multi-slicer is
properly assembled.
− Only use the multi-slicer indoors, and in dry areas away
from water.
− Never open the housing of the multi-slicer.
− Never drop or insert any object into any openings.
− Never try to repair the multi-slicer yourself. All repairs
must be carried out solely by a qualified electrician.
− Keep the main unit, cord and plug away from water and
other fluids.
− Keep the cord away from heated surfaces.
− Do not use the multi-slicer outdoors or operate where
aerosol (spray) products are being used or where oxygen
is being administered.
− Never operate the multi-slicer with the air openings
blocked or while on a soft surface, such as a bed or couch,
where it is possible for the air openings to be blocked.
Keep the air openings free of lint, hair, and similar objects.
− Do not touch the plug of the multi-slicer with wet hands.
− Always pull the plug and not the cord to disconnect the
multi-slicer from the socket.
− Never use the cord of the multi-slicer as a carrying strap.
− Lay the cord of the multi-slicer so that it does not pose a
tripping hazard.
To Next Page
Loading...
Need help?
General
