EasyManua.ls Logo

ambiq micro Apollo3 Blue Plus - FTDI Interface

ambiq micro Apollo3 Blue Plus
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Apollo3 Blue Plus EVB Quick Start Guide
Ultra-Low Power Apollo MCU Family
QS_A3P_1p1 Page 14 2020 Ambiq Micro, Inc.
All rights reserved.
7. FTDI Interface
The on-board FTDI chip (FT4222H) is a SPI to USB data streaming interface from the Apollo3 Blue Plus to
the connected PC. Transfer speed can exceed 200KBytes/sec, and the user can send generic data and
audio data to the PC over the interface at same time. Audio data is supported in raw PCM (16bit/16Khz),
SPP and OPUS formats. Complete instructions for using the interface with provided software can be found
in an article in the Ambiq Micro Support Community Knowledge Base -
https://support.ambiqmicro.com/hc/en-us/articles/360037829251.