EasyManua.ls Logo

AMC SR136 - DIP Switch Functions Configuration; Sound Alarm Memory; Visual Alarm Memory; Sound System Status Indication

AMC SR136
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.amcelettronica.com
SR136 V1.2.1 IT-EN
ELENCO FUNZIONI (DIP FUNCTIONS) - FUNCTIONS LIST ( DIP FUNCTIONS )
SR136 dispone delle seguenti funzioni, attivabili SINGOLARMENTE PORTANDO IN ON il dip corrispondente:
SR136 has the following functions that can be activated INDIVIDUALLY BRINGING ON the corresponding dip:
- Memoria di allarme sonora (DIP 1 ON):
- Sound alarm memory ( DIP 1 ON ):
emette una melodia quando si disinserisce l’impianto dopo un allarme
a melody sounds when you switch off the system after an alarm
- Memoria di allarme visiva (DIP 2 ON):
- Visual alarm memory ( DIP 2 ON ):
flash veloci continui dopo un allarme ad impianto inserito (si spegne quando viene disinserito l’impianto)
continue fast flashes after an alarm when the system is armed ( it turn off when the system is disarmed)
- Segnalazione stato impianto INSERITO/DISINSERITO di tipo sonora (DIP 3 ON):
- Sound system status indication ARMED / DISARMED ( DIP 3 ON ):
emette 3 BIP quando si inserisce l’impianto, 1 bip lungo quando si disinserisce l’impianto
it emits 3 beep when you arm the system, 1 long beep when you disarm the system
- Segnalazione stato impianto INSERITO/DISINSERITO di tipo visiva (DIP 4 ON):
- Visual system status indication ARMED / DISARMED (DIP 4 ON):
emette 3 brevi flash quando si inserisce l’impianto, 1 flash lungo quando si disinserisce l’impianto
it emits 3 flashes when you arm the system, 1 long flash when you disarm the system
- Segnalazione fissa di impianto INSERITO (DIP 5 ON):
- Fixed signaling of system ARMED ( DIP 5 ON ):
quando l’impianto è inserito emette un doppio lampeggio
when the system is armed gives a double flash
- Segnalazione di dispositivo OK “stand by” (DIP 6 ON):
- Siren OK indication “ stand by “ ( DIP 6 ON ):
emette un breve flash ogni 10 sec. quando il dispositivo sta funzionando correttamente
it emits a short flash every 10 seconds when the siren is operating properly
- Modifica tipo di Tono sonoro (DIP 7 ON):
- Change type sound ( DIP 7 ON ): loss of Omologation
Cambia il tipo di suono (da 1400Hz/1700Hz a 1600Hz/3500Hz)
Change the type of sound ( from 1400Hz/1700Hz to 1600Hz/3500Hz)
- Temporizzazione (DIP 8 ON):
- Timing of the siren ( DIP 8 ON ):
Aumenta la durata max del suono del dispositivo senza controllo della centrale, da 3’ a 15’
Increases the maximum duration of the siren sound without system control from 3’ to 15’

Related product manuals