www.amcelettronica.com
VOXOUT v. 1.2
- TECHNICAL INDICATIONS OF USING -
IMPORTANT: the equipment, if used like a device for transmission of alarms of a CIE, can be connected only
if:
- the CIE complies to EN 50131-1 and EN 50131-3 (Grade 1)
- the terminals “1,2”, connected to the outputs of a CIE, are programmed as “balanced inputs”, and confi-
gured to send vocal calls/SMS for intrusion and power failure;
- the terminal “3” is configured like “output of type T” (tamper) and connected to an input always active
controlled from the CIE;
- the terminal “4” is configured like “output of type G” (GSM failure) and connected to an input controlled
form the CIE;
- the terminal “5” can be used with a CIE that has the function of “robbery” (in this case the terminal con-
nected to an output of a CIE, must be progammed like “balanced input” and configured to send vocal calls/
SMS for robbery) or with a CIE that allows access at level 3 without the authorization of users at level 2.
NOTE: for CIE with grade upper to 1 and/or when there are 2 or more inputs like robbery, the device of tran-
smission of alarms can not be used (availability in inputs/outputs insufficient).
- INDICE -
PROGRAMMING MENU FROM KEYBOARD - 1 page 03
PROGRAMMING MENU FROM KEYBOARD - 2 page 04
PROGRAMMING MENU FROM KEYBOARD - 3 page 05
USER MENU page 06
VOICE GUIDED MENU page 07
CARD DESCRIPTION - EXAMPLE OF A CONNECTION TO AN EXCHANGE page 08
BEST PROVIDER TEST page 09
SYMBOLS AND DISPLAY VIEWING IN STANDBY page 09
RESET DEFAULT page 10
LED FUNCTIONING LOGIC page 10
PROGRAMMING page 10
MENU OF IN / OUT LINES NAMES page 10
MENU OF IN / OUT LINES TYPE page 10
MENU OF TELEPHONE NUMBERS page 11
RESET OF CALLS / SMS page 11
MENU OF VOICE CALLS page 11
MENU OF SMS MESSAGES page 12
MENU OF INPUTS page 13
MENU OF OUTPUTS page 13
MENU OF USER CODES page 14
CONTACT ID MENU page 14
SIM CREDIT INFO MENU page 15
TEST MENU page 15
MENU OF VARIOUS PARAMETERS page 16
PROGRAMMING AND MANAGEMENT FROM SMS MESSAGES page 17
TECHNICAL SPECIFICATIONS page 20