Humidity Removal Capacity 65 Pts. / Day
Recommended room size* Up to 400 sq. ft.
115V / 60Hz / 1 Phase 115V / 60Hz / 1 Phase
16"W x 17"D x 30"H 16"W x 17"D x 30"H
The cooling capacity of the unit may be affected by the height of the ceiling,
quality of insulation, number of windows, etc.
Turn the roller on the air vent to control
the airflow direction from the vertical louvers.
Move the air vent directly to adjust the
airflow direction from the horizontal louvers.
• The compressor will start approximately 3 minutes after the unit is turned on (this will
help prolong the life of the compressor). After switching the unit off, please wait at least
3 minutes before turning the unit back on.
• The cooling system will switch off if the room temperature is lower than set. The fan, however, keeps
working at the set level. If the ambient temperature rises above the chosen temperature +/
• In heating mode, the compressor will switch off if the room temperature is HIGHER than the one set
(the fan keeps working at the set level). When the room temperature drops 5
temperature, heating will resume.
• This machine is equipped with an ANTI-FROST function. Sometimes, while using the heating function
during low temperatures, the heating will stop for a while to melt the internal frost. When this occurs,
wait for heating to resume.
• As you switch on the heating, the fan will stop for 15-20 seconds prior to the unit starting.
Regulating the Airflow Direction
Mode Temp. Up Temp. Down Speed
To Next Page
Loading...
