Tap “Ethernet WiFi Setup”. Plug your camera into your router via an
Ethernet cable. Don’t worry, once the
camera is set up, the camera can be
unplugged and moved to a different location.
5 6
ETHERNET WIFI
SETUP
SETTING UP YOUR CAMERA
Ensure your mobile phone is
connected to the WiFi network
that you will be connecting your
camera to, then tap “Next”.
Scan the QR code from the sticker on your camera.
Move the camera or the phone to ensure that the entire
QR code is visible and focused in the frame. In case the
QR code cannot be scanned, please tap “Enter S/N
Manually” to enter in the camera’s serial number.
7 8
1211
To Next Page
Loading...
