Use the following procedure to attach a display using an adapter.
1. Turn off your computer and monitor.
2. Plug the adapter into the connection from your AMD FirePro card and tighten
the thumbscrews (if there are any).
3. Connect your display's cable to the adapter and tighten the thumbscrews (if
there are any).
4. Turn on your monitor first, then your computer.
Use the Control Center application to configure the new monitor, should you need to
do so.
10 Hardware Installation
AMD FirePro W600 © 2012 Advanced Micro Devices, Inc.
To Next Page
Loading...
