Need help?Do you have a question about the AMD FirePro W7000 and is the answer not in the manual?
General| GPU | Pitcairn |
|---|---|
| Process Size | 28 nm |
| Stream Processors | 1280 |
| Texture Units | 80 |
| ROPs | 32 |
| Core Clock | 950 MHz |
| Memory Clock | 1200 MHz |
| Memory Size | 4 GB |
| Memory Type | GDDR5 |
| Memory Interface | 256-bit |
| Memory Bandwidth | 153.6 GB/s |
| TDP | 150 W |
| Outputs | 4x DisplayPort 1.2 |
| Interface | PCIe 3.0 x16 |
| Max Resolution | 4096x2160 |
| DirectX Support | 11.1 |
| OpenGL Support | 4.5 |
| OpenCL Support | 1.2 |
| Shader Model | 5.0 |
| GPU Architecture | Graphics Core Next (GCN) |
Step-by-step guide to installing the graphics accelerator and software.
Detailed instructions for physically installing the graphics card into a PCIe slot.
Procedure for installing necessary drivers and control center software.
Step-by-step guide for installing a second graphics card for CrossFire Pro.
Provides troubleshooting tips for common issues encountered with the graphics card.
Troubleshooting steps for when the computer fails to start after installation.
To Next Page